Info: 'PrintMonitor is starting your manual feed document “^0” from “^1” on LaserWriter name “^2”.'
DITL_160.txt
Items: (3 entries)
0:
Bounds: x1=102, y1=90, x2=203, y2=113
Type: 4
Info: 'Try Again'
1:
Bounds: x1=254, y1=89, x2=355, y2=112
Type: 4
Info: 'Cancel'
2:
Bounds: x1=99, y1=12, x2=377, y2=69
Type: -120
Info: 'A PostScript error has been generated by the LaserWriter driver; the document is okay but cannot be printed.'
DITL_159.txt
Items: (4 entries)
0:
Bounds: x1=31, y1=165, x2=102, y2=185
Type: 4
Info: 'Yes'
1:
Bounds: x1=142, y1=165, x2=213, y2=185
Type: 4
Info: 'Cancel'
2:
Bounds: x1=249, y1=164, x2=320, y2=184
Type: 4
Info: 'No'
3:
Bounds: x1=83, y1=15, x2=348, y2=144
Type: -120
Info: 'PrintMonitor is currently printing “^0” from “^1”. If PrintMonitor quits now, “^0” will be printed when the system is restarted with MultiFinder. Do you want to finish printing before PrintMonitor quits?'
DITL_158.txt
Items: (2 entries)
0:
Bounds: x1=157, y1=100, x2=216, y2=120
Type: 4
Info: 'OK'
1:
Bounds: x1=92, y1=22, x2=308, y2=89
Type: 8
Info: 'PrintMonitor found that “^0” from “^1” is damaged and cannot be printed.'
DITL_157.txt
Items: (2 entries)
0:
Bounds: x1=152, y1=96, x2=212, y2=116
Type: 4
Info: 'OK'
1:
Bounds: x1=99, y1=26, x2=313, y2=82
Type: 8
Info: 'PrintMonitor found an internal problem. Where = ^0; Why = ^1;'
DITL_156.txt
Items: (3 entries)
0:
Bounds: x1=46, y1=140, x2=197, y2=160
Type: 4
Info: 'Adjust Memory Size'
1:
Bounds: x1=228, y1=140, x2=361, y2=160
Type: 4
Info: 'Cancel Job'
2:
Bounds: x1=92, y1=13, x2=393, y2=127
Type: 8
Info: 'PrintMonitor was unable to print “^0” from “^1” because PrintMonitor has insufficient memory. Do you want PrintMonitor to adjust its memory size and try to print again OR cancel your print job?'
DITL_155.txt
Items: (3 entries)
0:
Bounds: x1=114, y1=110, x2=174, y2=130
Type: 4
Info: 'Yes'
1:
Bounds: x1=223, y1=110, x2=283, y2=130
Type: 4
Info: 'No'
2:
Bounds: x1=102, y1=19, x2=312, y2=92
Type: 8
Info: '“^0” failed to print the first time. Do you want to try to print it again?'
DITL_154.txt
Items: (2 entries)
0:
Bounds: x1=150, y1=75, x2=210, y2=93
Type: 4
Info: 'OK'
1:
Bounds: x1=98, y1=18, x2=286, y2=50
Type: -120
Info: 'PrintMonitor can only be run under MultiFinder.'
DITL_153.txt
Items: (3 entries)
0:
Bounds: x1=251, y1=112, x2=311, y2=130
Type: 4
Info: 'No'
1:
Bounds: x1=137, y1=112, x2=197, y2=130
Type: 4
Info: 'Yes'
2:
Bounds: x1=99, y1=12, x2=353, y2=96
Type: -120
Info: '“^0” failed to print because the LaserWriter named “^1” could not be found. Do you want to try again?'
DITL_152.txt
Items: (4 entries)
0:
Bounds: x1=225, y1=99, x2=346, y2=123
Type: 4
Info: 'Delete Spool File'
1:
Bounds: x1=121, y1=100, x2=208, y2=122
Type: 4
Info: 'Try Again'
2:
Bounds: x1=34, y1=100, x2=104, y2=123
Type: 4
Info: 'Quit'
3:
Bounds: x1=99, y1=12, x2=353, y2=80
Type: -120
Info: '“^0” was printed without error. You can try again, quit, or delete the spool file (normal mode).'
DITL_151.txt
Items: (3 entries)
0:
Bounds: x1=178, y1=100, x2=279, y2=123
Type: 4
Info: 'Try Again'
1:
Bounds: x1=48, y1=100, x2=149, y2=123
Type: 4
Info: 'Cancel'
2:
Bounds: x1=99, y1=12, x2=353, y2=80
Type: -120
Info: '“^0” failed to print due to a timeout. The document is okay, and it is recommended that you try again.'
DITL_150.txt
Items: (4 entries)
0:
Bounds: x1=280, y1=96, x2=340, y2=114
Type: 4
Info: 'No'
1:
Bounds: x1=191, y1=96, x2=251, y2=114
Type: 4
Info: 'Yes'
2:
Bounds: x1=99, y1=12, x2=353, y2=80
Type: -120
Info: '“^0” failed to print. Do you want to try to print it again?'
3:
Bounds: x1=9, y1=96, x2=172, y2=120
Type: -120
Info: '^3'
DITL_132.txt
Items: (8 entries)
0:
Bounds: x1=207, y1=83, x2=267, y2=103
Type: 4
Info: 'OK'
1:
Bounds: x1=206, y1=44, x2=266, y2=64
Type: 4
Info: 'Cancel'
2:
Bounds: x1=43, y1=34, x2=140, y2=56
Type: 0
Info: ''
3:
Bounds: x1=43, y1=55, x2=140, y2=76
Type: 0
Info: ''
4:
Bounds: x1=10, y1=9, x2=113, y2=25
Type: -120
Info: 'Set Print Time:'
5:
Bounds: x1=17, y1=38, x2=37, y2=57
Type: 6
Info: ''
6:
Bounds: x1=17, y1=94, x2=181, y2=116
Type: 6
Info: 'Postpone Indefinitely'
7:
Bounds: x1=203, y1=79, x2=271, y2=107
Type: 0
Info: ''
DITL_130.txt
Items: (20 entries)
0:
Bounds: x1=243, y1=246, x2=303, y2=266
Type: 4
Info: 'OK'
1:
Bounds: x1=166, y1=246, x2=226, y2=266
Type: 4
Info: 'Cancel'
2:
Bounds: x1=8, y1=8, x2=112, y2=24
Type: -120
Info: 'Preferences…'
3:
Bounds: x1=22, y1=27, x2=319, y2=43
Type: -120
Info: 'Show PrintMonitor's window when printing:'
4:
Bounds: x1=104, y1=46, x2=148, y2=62
Type: 6
Info: 'No'
5:
Bounds: x1=159, y1=46, x2=204, y2=62
Type: 6
Info: 'Yes'
6:
Bounds: x1=239, y1=242, x2=307, y2=270
Type: -128
Info: ''
7:
Bounds: x1=22, y1=73, x2=317, y2=89
Type: -120
Info: 'When a printing error needs to be reported:'